Dogtra Belt Clip #5 Metal (Black, Large)

$6.99

Dogtra Belt Clip #5 Metal (Black, Large). Metal belt clip #5, for Dogtra models: 2500T&B, 2502T&B, 3500NCP, and 3502NCP. Genuine Dogtra, shipped worldwide with tracking.

SKU: DG-BELT-CLIP-5-METAL Categories: , Tags: , Brand:

Description

The Dogtra belt clip #5 metal is the large black metal clip for Dogtra’s bigger remotes. It comes with two screws.

Will the Dogtra Belt Clip #5 Metal fit?

It’s listed for the 2500T&B, 2502T&B, 3500NCP and 3502NCP.

Carrying the remote

A good clip keeps the remote where your hand expects it, which means faster reactions. Wear it on the side you train with, and use a lanyard as well in heavy cover, where a clip can get knocked loose.

Fitting it

Remove the old clip, line up the new one and fit the screws firmly. Don’t overtighten them into plastic. Give it a tug before you head out. The manual on Dogtra’s website shows the clip for your model.

When to replace it

Replace the clip when it starts opening on its own or the remote twists loose when you bend down. A cracked clip or a frayed lanyard is a warning, not a curiosity.

Metal or plastic?

Metal clips grip harder and stand up to a season of truck doors and fence crossings. Plastic is lighter and gentler on the remote’s finish. Go with what your remote came with, since the mounting was designed around it.

Clip plus lanyard

In open fields a clip is enough. In thick brush or water, add a lanyard as well. A snag can knock a remote off a belt without you noticing until you reach for it.

Spare screws

The clip comes with the screws you need. Keep the old ones as spares, and check the screws are tight every few weeks during the season. They can loosen slowly with vibration in the truck.

Which clip is mine?

Quick guide. The #4 is the small metal clip for remotes like the 280C, ARC, 1900S and 2300NCP. The #5 is the large metal clip for the 2500T&B and 3500NCP. The #6 is for the Edge. The #8 fits dual dial remotes like the T&B Dual and 3500X. The #9 is the plastic clip for X-Series remotes and the 200iQ.

Other parts for these remotes

The 2500T&B and 3500NCP charge with a 10 volt charger like the SBC10V1500. If you’re replacing a clip, check the charging cap too, since both tend to wear at the same time.

Ordering tips

Small parts are cheap to add to a bigger order. If you’re also due a battery, strap or contact points, put them in the same order so it all ships together with one tracking number.

Why genuine

Genuine only. We sell new, original Dogtra parts in their packaging, made to Dogtra’s own specs, so they fit and work the way the factory part did.

Dogtra Belt Clip #5 Metal questions

Is the Dogtra belt clip #5 metal bigger than the #4?

Yes. The #5 is the large clip for bigger remotes, and the #4 is the small one.

What’s included?

The clip and two screws.

Can I return it if it’s the wrong part?

Unused parts in the original packaging can come back within 30 days. See shipping and returns.

Order the Dogtra Belt Clip #5 Metal here, or see all belt clips and lanyards.

Reviews

There are no reviews yet.

Be the first to review “Dogtra Belt Clip #5 Metal (Black, Large)”

Your email address will not be published. Required fields are marked *