Description

The Dogtra Charger 5V2000 5.5 is a 5 volt, 2000mA genuine Dogtra charger with a 5.5 plug.

Which models does the Dogtra Charger 5V2000 5.5 fit?

Dogtra doesn’t publish a model list for this one on our page, so the safest check is the label on your old charger. If it reads 5V and 2000mA with the same plug, this is a match. Not sure? Send us a photo of your old charger’s label.

Splitter cables

Dogtra chargers don’t come with splitter cables. If you want to charge the remote and collar at the same time, add the right splitter to your order. The 5-5 splitter suits most current models.

Charging tips

If you’re charging a remote and a collar together, use the right splitter cable and plug both in before you switch the charger on at the wall. Unplug when they’re done. There’s no benefit to leaving them on for days. Your model’s manual on Dogtra’s website has the exact charging times and light codes.

Is it the charger or the battery?

Before you blame the battery, try a different charger if you’ve got one. If the unit charges fine on that, the old charger has had it.

A spare for the truck

If more than one person in the house trains, a second charger saves arguments over whose collar gets charged first.

Looking after the charging port

If the plug feels loose in the port or only charges at a certain angle, look at both ends. A bent pin on the plug or dirt in the port will both do it. Clean the port, straighten nothing by force, and replace the cap if it no longer closes snugly.

Off-season storage

At the end of the season, charge everything about halfway, unplug it and store the units and chargers together in a dry place. Coil the charger cable loosely, since tight wraps near the plug are where cables break.

Why a genuine charger

We only sell genuine Dogtra chargers. The voltage, current and plug match what your unit was designed for. A charger that’s close but not right can charge slowly, run hot or never fully charge the battery.