Description

The Dogtra charging rubber cap #T16 is the replacement charging port cap for the T&B Dual dial transmitter.

Will the Dogtra Charging Rubber Cap #T16 fit?

It’s for the T&B Dual dial transmitter.

Why the cap matters

Waterproof ratings assume every cap is in place and sealed. One missing cap is all it takes for water to reach the charging port.

Signs it needs replacing

Old rubber goes stiff and stops sealing. If yours doesn’t press in snugly anymore, it’s done its job.

Fitting a new cap

Clean the port, fit the cap and press it home. It should feel snug, not loose.

Keeping the port clean

After a wet day, let the unit dry with the cap closed, then open it, check it’s dry inside, and charge.

Which cap is mine?

A quick guide to the caps we stock. The #T14 is for the Edge and Edge RT. The #T12 fits the 2300NCP and RR Deluxe transmitters. The #T11 covers the 1900S transmitter and many older NCP models. The #T15 is for the 2700T&B remote and the #T16 for the T&B Dual remote. X-Series remotes take the #17, and 1900X and CUE receivers the #R7. Launcher units use the #R5, #T6 and #T3.

Keep a spare

If you’ve lost one cap, you’ll lose another. A spare costs less than a coffee. Dogtra’s manuals are on Dogtra’s website.

Other T&B Dual parts

The remote runs on the BP74T3P, uses the ANT 5 and takes dial knobs #22 and #23.

Ordering tips

If you train most days, buy a spare while you’re here. A second clip, antenna, cap or set of points tucked into the kit bag can save a whole session when something gets lost or broken far from home and the nearest shop that stocks Dogtra parts is a long drive away. Worth it.

Why genuine

It’s the real thing. We only stock genuine Dogtra parts, and if you’re unsure about fit, ask us before you order and we’ll check it against your model.