Description
The Dogtra belt clip #6 metal is made for the Edge. Why its own clip? The Edge remote has a tube shape, so the standard flat clips don’t sit right on it. The pack includes the clip and two screws, which is everything you need to fit it in a couple of minutes at the kitchen table.
Will the Dogtra Belt Clip #6 Metal fit?
It’s for the Edge series.
Carrying the remote
Most handlers clip the remote to a belt or vest at the hip. In thick brush or water, add a lanyard around the neck so a snag doesn’t cost you the remote.
Fitting it
Take off the old clip, fit the new one with the screws and check it’s solid. If the screw holes are worn, ask us before forcing anything.
When to replace it
Clips wear at the spring and hinge. Once they lose their grip, swap them out. It’s far cheaper than a lost remote.
Metal or plastic?
Each Dogtra clip is matched to specific remotes, so the choice is usually made for you. If both fit, metal lasts longer and plastic is lighter.
Clip plus lanyard
Lots of handlers run both: clip on the belt, lanyard round the neck. If the clip lets go, the lanyard catches it.
Spare screws
If a screw hole in the remote is stripped, don’t force a bigger screw in. Ask us first, since forcing it can crack the case.
Which clip is mine?
Quick guide. The #4 is the small metal clip for remotes like the 280C, ARC, 1900S and 2300NCP. The #5 is the large metal clip for the 2500T&B and 3500NCP. The #6 is for the Edge. The #8 fits dual dial remotes like the T&B Dual and 3500X. The #9 is the plastic clip for X-Series remotes and the 200iQ. Dogtra’s manuals are on Dogtra’s website.
Other Edge parts
The Edge remote runs on the BP74TE3P and the collar on the BP74RE3P. The Edge has its own SBC10V2000 charger, dial knobs (#11, #12, #13) and the #T14 charging cap.
Ordering tips
Ordering for more than one dog or more than one system? Put everything in one order and it arrives in one box. If you’re not sure which part matches which unit, list your models in the order notes or message us first.
Why genuine
No copies here. Everything is original Dogtra. That matters with small parts too, because a part that’s slightly the wrong size can affect fit, waterproofing or contact.
Dogtra Belt Clip #6 Metal questions
Does the Dogtra belt clip #6 metal fit the Edge RT?
It’s listed for the Edge. Ask us if you want to check the Edge RT.
What’s included?
The clip and two screws.
Do you ship outside the US?
Yes, with tracking. Details are on the shipping and returns page.
Order the Dogtra Belt Clip #6 Metal here, or see all belt clips and lanyards.
Reviews
There are no reviews yet.