Description
The Dogtra charging rubber cap #T11 fits a long list of Dogtra transmitters and receivers, including the 1900S series transmitter. It’s one of the most widely used caps in the range.
Will the Dogtra Charging Rubber Cap #T11 fit?
Dogtra’s list includes the 200NCP Gold (S/N above 111361), 202NCP (S/N above 101961), 280NCP, 282NCP, 1400NCP to 1700NCP, 1900NCP, 1902NCP, the 7000 and 7100 series and the M Plus and H Plus, among others. Check your model or ask us.
Why the cap matters
Waterproof ratings assume every cap is in place and sealed. One missing cap is all it takes for water to reach the charging port.
Signs it needs replacing
Old rubber goes stiff and stops sealing. If yours doesn’t press in snugly anymore, it’s done its job.
Fitting a new cap
Clean the port, fit the cap and press it home. It should feel snug, not loose.
Keeping the port clean
After a wet day, let the unit dry with the cap closed, then open it, check it’s dry inside, and charge.
Which cap is mine?
A quick guide to the caps we stock. The #T14 is for the Edge and Edge RT. The #T12 fits the 2300NCP and RR Deluxe transmitters. The #T11 covers the 1900S transmitter and many older NCP models. The #T15 is for the 2700T&B remote and the #T16 for the T&B Dual remote. X-Series remotes take the #17, and 1900X and CUE receivers the #R7. Launcher units use the #R5, #T6 and #T3.
Keep a spare
If you’ve lost one cap, you’ll lose another. A spare costs less than a coffee. Dogtra’s manuals are on Dogtra’s website.
Other 1900S parts
The 1900S remote runs on the BP74T23P and the collar on the BP74RS3P. The dial knob is the #4.
Ordering tips
If you train most days, buy a spare while you’re here. A second clip, antenna, cap or set of points tucked into the kit bag can save a whole session when something gets lost or broken far from home and the nearest shop that stocks Dogtra parts is a long drive away. Worth it.
Why genuine
It’s the real thing. We only stock genuine Dogtra parts, and if you’re unsure about fit, ask us before you order and we’ll check it against your model.
Dogtra Charging Rubber Cap #T11 questions
Will the Dogtra charging rubber cap #T11 fit my 1900S remote?
Yes, it’s made for the 1900S series transmitter.
How do I check my serial number?
It’s on the label. Send us a photo if you can’t read it.
Is it a genuine Dogtra part?
Yes. Everything we sell is new, original Dogtra.
Order the Dogtra Charging Rubber Cap #T11 here. More small spares are in caps, knobs and small parts.
Reviews
There are no reviews yet.