Description

The Dogtra collar strap 3/4 x 28 is a 3/4 inch wide, 28 inch long strap for many of Dogtra’s popular smaller systems. It comes in black, yellow, green, blue and orange, so you can colour-code your dogs.

Will the Dogtra Collar Strap 3/4 x 28 fit?

It fits systems including the 280X, iQ, iQ Plus, 200C/202C, 280C/282C and EF-3000 series.

Getting the fit right

The strap should be snug enough that both contact points touch the skin, with room for one finger between the strap and the neck. Too loose and the receiver slides around. Too tight and it rubs. Fit it high on the neck, just behind the ears.

Swapping the strap

Remove the receiver from the old strap, thread the new strap through the same slots the same way round and refit the buckle. Check the receiver sits flat and the contact points face the neck. The manual on Dogtra’s website shows how each receiver attaches.

Caring for collar straps

Rinse straps in fresh water after mud, marsh or salt water and let them dry off the dog. Check the holes and buckle for wear each season. A strap that’s stretched or cracked should go before it breaks in the field.

Which strap fits my collar?

Quick guide. The 3/4 x 28 inch strap fits smaller receivers like the 280X, iQ, 200C and 280C. The 3/4 x 32 inch is the same width with extra length for bigger necks. The 1 x 30 inch fits larger receivers like the 1900X, ARC, 1900S, 2300NCP and Edge. T&B collars use the 1 x 24 inch T&B strap, and the YS300 has its own 3/4 x 24 inch strap.

Pairs well with

Pair a new strap with fresh contact points and you’ll have a collar that fits like new.

Ordering tips

Small parts are cheap to add to a bigger order. So add them. If you’re also due a battery, a new strap or a fresh set of contact points before the season starts, put everything in the same order and it all ships together in one box with one tracking number, which is a lot easier than chasing three parcels.

Why genuine

Genuine only. We sell new, original Dogtra parts in their packaging, made to Dogtra’s own specs, so they fit and work the way the factory part did.